Table of Contents
Advertisement
System Status Item
T.120 Status:
Displaying Hardware Configuration Information
Display configuration information
about the audio board
Display configuration information
about the video board
Display configuration information
about the PowerCam camera
State
Tells you whether your site is a local or remote
participant in the T.120 conference.
Conference Num
Shows the conference number (if you are in a T.120
conference).
Number of Nodes
Shows the number of sites in the conference (if you
are in a T.120 conference).
You can obtain conÞguration information on the audio and video
boards of your system and any attached PowerCam cameras. Some
of the information you can obtain includes the part numbers,
diagnostic revision numbers, and serial numbers. This information
can be helpful to a PictureTel service provider in diagnosing
hardware problems.
To display hardware conÞguration information about your system:
1. From the System Status menu, choose Display Hardware
Configuration.
A menu similar to the one shown below appears. If you have
more than one PowerCam camera connected to your system,
youÕll see additional items under the
item.
Displaying System Status Information
Description
Main Video Source
menu
7-23
Advertisement
Table of Contents
