Setting The Camera Configuration - PictureTel Venue-2000 Administrator's Manual

CONFIGURING AND ADJUSTING THE VIDEO AND AUDIO
If you choose these settings...
Set Preview Monitor (Main)
Set VCR Recording Mode (Video Sent)
Set Preview Monitor (Preview)
Set VCR Recording Mode (Video Sent)
Setting the Camera Configuration
5-4
2. To use the dual-monitor features, you must set the VCR Recording
Mode even if you are not using a VCR:
a. From the Video ConÞguration menu, choose
Camera/Video Sources
b. From the Video Source ConÞguration menu, choose
Configure VCR Source
c. From the VCR Source ConÞguration menu, choose
Recording Mode
A pop-up window appears with a list of choices.
a. Choose
Video Sent
Menu Settings for Preview Video and Snapshots
The following table explains the combinations of snapshot and
preview menu settings you can use and gives a description of the
results that occur when you choose them.
Preview video is displayed on the main
monitor. Snapshots are displayed on the main
monitor. The second monitor is used to view
the video that is being sent to the far end.
Preview video is displayed on the second
monitor. Snapshots are displayed on the main
monitor.
You can determine how to customize your camera and your VCR for
use at your site by choosing
ConÞguration menu.
.
.
.
.
This occurs...
Set Camera Configuration
Configure
Set
from the Video