Displaying Self-Test Results
You can display the results of the full system self-tests and the
hardware self-tests by choosing
Self-Tests menu. Two Self-Test Results screens similar to the
following ones appear. (Use
The screens that appear depend on the hardware options
F.Y.I.
F Y I
and network interfaces that are installed on your system.
The names shown on this screen for video sources and
network interfaces are Þxed and donÕt change, even if you
change the names through the conÞguration menus.
Test results can be either
defective component, call your PictureTel service provider.
Display Self-Test Results
and
to move between screens.)
or
. If the self-tests indicate a
OK
Defective
Running Self-Tests
from the
7-9