Table of Contents
Advertisement
CONFIGURING AND ADJUSTING THE VIDEO AND AUDIO
5-14
Setting the Camera Exposure
You can adjust a cameraÕs method of exposure through the
E
item. In most cases, leave the setting at automatic. The
xposure
following table explains the choices available.
Setting
Automatic
Sets the camera exposure to the factory-set
calibration. Choose this default setting for typical
videoconferencing room or ofÞce lighting.
Manual
Enables you to use
the picture. Choose this setting if you want to
manually adjust the exposure using the arrow
buttons. The camera does not retain this setting if you
power down the system, but returns to the
exposure setting.
To set the camera exposure:
1. From the Video Source Configuration menu, choose the video
source that you want to configure.
2. From the Source Configuration menu for that video source,
choose Set Exposure.
A pop-up window appears, listing the choices.
3. Choose the desired setting and press ENTER .
The current setting appears.
Description
and
to brighten or darken
Set
Automatic
Advertisement
Table of Contents
