To create a new entry in the Dialing Directory:
1. From the Dialing Directory Setup menu, choose Create a New
Directory Entry.
An entry screen similar to the following one appears asking you
to choose the network interface that the directory entry will use.
This screen appears only if there is more than one network
interface installed in your system. See Chapter 2, ÒConÞguring
NetworksÓ for more information.
2. Choose the network interface for this entry and press ENTER .
A screen appears with the next available directory entry number
displayed. You can use that number or enter your own number.
You use this number to place a speed-dialed call.
Using the Dialing Directory Setup Menu
3-5