Table of Contents
Advertisement
FACTORY DEFAULT SETTINGS
Menu
PRI Line ConÞguration
V.35/RS-449 Network
ConÞguration
Switched-56 Network
ConÞguration
T1 Network ConÞguration
T1 Line ConÞguration
E1 Network ConÞguration
E1 Line ConÞguration
Spare Bits ConÞguration
System Tests
Set Self-Test Options
System Exercises
Voice Call Settings
a. These values are not reset when you restore default configuration settings.
A-4
Default Setting
Set Switch Type - None
Set Service Type - None
Set Automatic Rate Adaption - Enabled
Set Network Name - V.35/RS-449
Set Redial on Line Drop - On
Set Network Name - Switched 56
Set Redial on Line Drop - On
Set Network Name - T1
Set Data Rate - 1536 kbps
Set Timing Mode - Network
Set Line Coding - B8ZS
Set Channel Type - Unrestricted
Set Line Framing - ESF
Set Line Build-Out - 0db
Set Network Name - E1
Set Data Rate - 1920 kbps
Set Timing Mode - Network
Set Channel Type - Unrestricted
Set CRC4 - Enabled
National Bit 1 through 5 - 1
International Bit 0 through 1 - 1
Set Remote Access Level - None
Enable Extended Tests - Off
Enable Repeated Tests - Off
Set ISDN Call Trace - Off
Install Voice Adapter - Off
Block Voice Calls - Off
Auto Answer Voice Calls - Off
Advertisement
Table of Contents
