Table of Contents
Advertisement
CONFIGURING NETWORKS
Accessing the
Network
Configuration
Menu
Configure the system
to use the network
interface(s) that
appear on this screen
F Y I
2-2
Capability (U.S. and Japan). A T1 line can carry up to 24 total
channels at 64 kbps.
E1 Ñ A European digital transmission facility used to transmit
a digital signal at 2.048 megabits per second. An E1 line can
carry up to 32 channels at 64 kbps.
The following sections discuss how to conÞgure the network
interfaces for your system.
Follow these steps to access the network conÞguration menus:
1. Press SETUP .
2. From the Setup menu, choose Configure System .
3. From the System Configuration menu, choose Set Network
Configuration .
When you choose
ConÞguration menu, you see a Network ConÞguration menu
similar to this:
The Network ConÞguration menu lists only the network
F.Y.I.
interface boards installed in your system.
The following sections describe how to conÞgure network
interfaces. Read the section that pertains to the type of network
interface you have.
Set Network Configuration
from the System
Advertisement
Table of Contents
