Connecting A Second Monitor - PictureTel Venue-2000 Administrator's Manual

Connecting a
Second Monitor
5. Plug one of the RCA-to-RCA audio cables (that come with the VCR)
from the AUDIO IN connector on the VCR to the VCR RECORD
)
( connector on the Venue
6. Plug the other RCA-to-RCA audio cable from the AUDIO OUT
connector on the VCR to the VCR PLAY (
•
Venue 2000 audio board.
7. When you are sure all cables are connected properly, you may
plug the VCR power cable to the wall outlet, and then power up
•
your Venue 2000.
To connect a second monitor to your Venue¥2000:
1. Power down your videoconferencing system.
2. Plug the Venue • 2000 VCR video cable that is labeled
connector labeled
3. Plug one end of the RCA-to-RCA cable into the
on the Venue • 2000 VCR video cable.

Connecting a Second Monitor

•
2000 audio board.
3
on the video board.
)
connector on the
3
into the
connector
C-9