Table of Contents
Advertisement
INSTALLING PICTURETEL LIVE50 HARDWARE
Installing
Optional Network
Interface Boards
2-8
If you are not using an ISDN connection, you have several network
connection options that require installing one or more network
interface boards. The following table identifies the appropriate
network interface board for each type of network connection. Refer
to Appendix C, Installing Network Interface Boards for a complete
description of the installation process.
If you need this
connection type:
ISDN (BRI)
Integrated 4-Wire SW56
V.35 (or RS-449) dialed/
nondialed
Note: For V.35 and RS-449 connections, CSU/DSUs (Channel
Service Unit/Data Service Units) may be required
between the PC and the telephone company's digital
network connection. Your installation may already have
these devices in place. Consult your telephone company
representative.
The required hardware boards are
listed here:
No optional network interface boards are
required.
(Consult your telephone provider to
determine if a network termination device
(NT1) is required.)
Switched-56 Network Interface
DDM/Network Interface
Advertisement
Table of Contents
