Setting The Local Number Filter; Setting The Numbers For Isdn Protocols - PictureTel Venue-2000 Administrator's Manual

Setting the Local Number Filter

Setting the Numbers for ISDN Protocols

NI1 and DMS100 dialects require
that you enter Service Profile IDs
(SPIDs)
Enter local numbers for ISDN
Triple-BRI networks to receive
incoming calls
The
Set Local Number Filter
numbers should be used to Þlter incoming calls. This setting is
required for all ISDN Triple-BRI conÞgurations.
See the next section, ÒSetting the Numbers for ISDN Protocols,Ó for
more information.
The option on the ISDN Triple-BRI Protocol
Set Numbers
ConÞguration menu brings up this menu:
The Set Numbers menu lets you specify the Service ProÞle IDs
(SPIDs) and the local numbers (also known as Multisubscriber
Numbers).
SPIDs and local numbers are used in conÞgurations that have more
than one ISDN device on the same line.
SPIDs are used to identify your equipment to the network so
that the network knows it is communicating with the correct
equipment. When you are using SPIDs, equipment providers
also require you to use local numbers.
ConÞguring an ISDN Triple-BRI Network
option determines whether or not local
2-13