Table of Contents
Advertisement
Setting the Camera Focus
If your camera has this capability, you can set the way in which a
camera focuses through the
setting at automatic. The following table explains the choices
available.
Setting
Automatic
Sets your camera to focus automatically. Use this
default setting most of the time.
Delayed
Use the
unsatisfactory results with the automatic focus
setting. If you have chosen the
press a
button, your camera focuses automatically for four
seconds, then locks itself to that appropriately
focused state.
Note: This setting is not supported on the
Manual
Lets you use
focus. The camera does not retain this setting when
you power down the system, but returns to the
Automatic
To set the camera focus:
1. From the Video Source Configuration menu, choose the video
source that you want to configure.
2. From the Source Configuration menu for that video source,
choose Set Focus.
A pop-up window appears, listing the choices.
3. Choose the desired setting and press ENTER .
The current setting appears.
Setting the Video ConÞguration
F
item. In most cases, leave the
Set
ocus
Description
setting if you are getting
Delayed
button or the
NEAR END POINT
PowerCam 30 camera.
and
to adjust the camera
focus setting.
setting and
Delayed
ZOOM
5-13
Advertisement
Table of Contents
