Setting The Snapshot Monitor; Setting The Preview Monitor - PictureTel Venue-2000 Administrator's Manual

Setting the Snapshot Monitor

A snapshot is a high-resolution, still image, similar to an electronic
photograph. On a single-monitor system, you can view snapshots
you are sending on your monitor screen.
When you are using a system with a graphics monitor, you can show
the snapshots you are sending or receiving on the graphics monitor
or on the main monitor.
To change the destination for snapshot displays:
1. From the Video Configuration menu, choose Set Snapshot
Monitor.
A pop-up window appears, listing two choices.
2. Do one of the following:
Choose
on the graphics monitor.
Choose
the main monitor.

Setting the Preview Monitor

If your system has two monitors (NTSC or PAL), you can decide
where to display preview video and snapshots. This section
explains how to set up your system. See the table in the next section
for information on the combination of settings you should use for
your desired result.
1. To indicate the monitor on which to display preview video:
a. From the Video ConÞguration menu, choose
Monitor
b. Choose
display on the preview monitor (the second monitor).
To indicate the monitor on which to display snapshots:
a. From the Video ConÞguration menu, choose
Monitor
b. Choose
and press
Snapshot ENTER
and press
Main ENTER
.
to display on the main monitor or
Main
.
.
Main
Setting the Video ConÞguration
to have snapshots appear
to have snapshots appear on
Set Preview
Preview
Set Snapshot
to
5-3