CONNECTING OPTIONAL EQUIPMENT
Connecting
Equipment to the
Video Board
C-2
There are four pan-tilt-zoom (PTZ) ports on the Venue•2000
systemÕs video board. When you connect a PictureTel PTZ camera to
one of these ports, you have full PTZ capability (provided the
camera has this feature).
When you order PictureTel equipment, you receive the correct
cables with the equipment. If you have purchased equipment from
a non-PictureTel source, you may need to order the following cables:
Cable 510-0193-01 for S-video connections
Cable 510-0192-01 for composite connections
Adapter cable 180-0166-01 that goes from the camera to the
S-video cable
Adapter cable 510-0173-01 that goes from the camera to the
composite video cable
Attaching equipment to the video connectors gives you the
capability to transmit motion video or snapshots to a far-end site.
The following illustration shows the connectors on the Venue•2000
systemÕs video board.
Video
Main
camera
8
Document
camera
8
A
Auxiliary
camera A
8
B
Auxiliary
camera B
8
VCR
input/output
3
Monitor
video out