Table of Contents
Advertisement
Testing Audio Subsystems
To test audio subsystems:
1. From the Hardware Module Self-Tests menu, choose Test Audio
Subsystems.
The following menu appears:
2. Choose Test All Audio Subsystems and press ENTER .
Once the diagnostic software is loaded (30 seconds), this test
takes approximately 1 to 2 minutes to run.
3. Note the status message when the test completes.
Test results can be either
defective component, call your PictureTel service provider.
or
. If the test indicates a
OK
Defective
Running Self-Tests
7-7
Advertisement
Table of Contents
