2-7-4.To Reset The Counter Of The Toner Cartridge (Only 1100); 2-7-5.To Reset The Counter Of The Drum Cartridge (Only 1100) - Minolta QMS PageWorks/Pro 1100 Service Manual

2-7-4. To Reset the Counter of the Toner Cartridge (only 1100)
Perform the following procedure to reset the toner cartridge counter after you
replace the toner cartridge.
1. While holding down the panel button, turn on the printer.
2. Keep the panel button held down, and the Ready indicator will start to blink.
After the Ready indicator has blinked for about 5 seconds, release the panel
button. This should cause all the indicators to start to blink.
3. After confirming that all the indicators are blinking, press and hold down the
panel button again for at least 5 seconds. During this time, the Ready indicator
only continues to blink and all the other indicators turn off.
4. Release the panel button and only the Paper indicator starts to blink.
5. After a few seconds, all the indicators start to blink again, indicating that the
toner cartridge counter has been reset.
6. Turn off the printer. The printer will be ready to print the next time you turn it on.
2-7-5. To Reset the Counter of the Drum Cartridge (only 1100)
Perform the following procedure to reset the drum cartridge counter after you
replace the drum cartridge.
1. While holding down the panel button, turn on the printer.
2. Keep the panel button held down, and the Ready indicator will start to blink.
After the Ready indicator has blinked for about 5 seconds, release the panel
button. This should cause all the indicators to start to blink.
3. After confirming that all the indicators are blinking, briefly press the panel but-
ton. This causes the Error indicator to blink and all the other indicators to turn
off.
4. After a few seconds, all the indicators start to blink again, indicating that the
drum cartridge counter has been reset.
5. Turn off the printer. The printer will be ready to print the next time you turn it on.
20