User Setup PREFERENCES
You can make various settings for the RIVAGE PM10's operating environment, such as how popup
windows appear, and whether [SEL] key on/off operations will be linked.
Press the SETUP button on the menu bar to access the SETUP screen.
Press the PREFERENCES button to access the PREFERENCES popup window.
This window includes several pages, which you can switch between using the tabs located at
the top of the window.
Use the buttons on screen to make Preference settings.
When you finish making settings, press the CLOSE button.
This section enables you to set up the link between the selected channel/parameter on the
screen and the [SEL] keys, and the link between bays and the [SEL] keys. Linked elements will
be indicated in the same color.
Any unlinked elements will be indicated in gray.
[CUE] [SEL] LINK
Specifies whether channel selection will be linked with cue operations. If this button is on,
pressing any channel [CUE] key to turn it on will simultaneously select that channel and light
up its [SEL] key.
[CUE]–[SEL] LINK APPLIED TO:
Enables you to specify to what extent the CUE SEL LINK setting applies. Options include
INPUT, OUTPUT, and INPUT/OUTPUT.
CUE OPERATION MODE field
Switches between CUE BAY mode and CH mode
A, CUE B, or CUE A+B for each bay. In CH mode, you can select CUE A, CUE B, or CUE A+B
for each channel.
• CUE SETTINGS popup button
Press this button to display the window, in which you can configure the Cue for each
channel in CH mode
83). In BAY mode, you can select CUE
RIVAGE PM10 Operation Manual