To Stereo - Yamaha RIVAGE PM10 Operation Manual

CH Parameter  TO STEREO
TO STEREO field in the
OVERVIEW screen
Each screen contains the following items.
TO STEREO popup window
1
2
3
4
6
5
1
TO STEREO field in the
SELECTED CHANNEL VIEW screen
1 Channel select button
Indicates the channel. Press the button to select the on-screen selected channel. The current
channel icon, number, and color appear on the button, and the channel name appears below
the button.
2
ST/LCR mode select button
Press this to switch the mode between ST and LCR. The currently-selected mode is displayed
with emphasis.
3 TO ST A button
Turns the signal sent to the STEREO A bus on/off.
4 TO ST B button
Turns the signal sent to the STEREO B bus on/off.
5 TO ST PAN/TO ST BALANCE knob
For a MONO channel, this knob functions as a PAN knob that adjusts the left/right position of
the signal sent to the STEREO bus. For a STEREO channel, this knob functions as a
BALANCE knob that adjusts the volume balance of the left/right signals sent to the STEREO
bus. To edit a value, press a knob to select it, and then use the corresponding screen encoder.
6 ∑ clipping indicator
This indicator lights to indicate that a signal is clipping at some point in the channel.
NOTE
This is also shown for MATRIX channels that do not have a stereo send.
If the ST/LCR mode select button is set to LCR mode, the following button and knob will be
shown instead of the TO ST A button (3) and TO ST B button (4).
7 LCR button
Switches on/off all signals sent from the channel to the STEREO
bus. If this button is off, the corresponding channel will send no
signals to the STEREO bus.
8
CSR knob
Adjusts the ratio of the signal level sent from the channel to the
STEREO A (L/R) bus and the signal level sent to the STEREO B
(C) bus, in a range of 0–100%. To change the value, press the
knob to select it, and then use the corresponding screen encoder.
135
CONTENTS FUNCTION MAP
7
8
RIVAGE PM10 Operation Manual
FAQ