Scene Memory Recalling a scene
Recalling a scene
You can recall scene data into current memory. Scene data is recalled through three filters: Focus,
Recall Safe, and Channel Isolate.
Use the SCENE MEMORY [INC]/[DEC] keys to select the scene number that you
want to recall.
The scene number of the currently-selected scene appears in the SCENE field of the menu bar.
If you recall any scene other than the last-recalled or stored scene (hereinafter called "current
scene"), the scene number will flash.
To view the comments, press and hold down the [SHIFT] key and press the SCENE field.
Flashing scene number
The SCENE field always displays general information about the scene. To switch between
scene comment and scene title displays, hold down the [SHIFT] key and press the SCENE
field. You can also press this field to access the SCENE LIST screen, in which you can view and
edit more detailed settings for the scene.
Indicates the number of the currently-selected scene.
Indicates the title of the currently-selected scene.
Indicates the comments for the currently-selected scene.
In the bottom two rows, you can view the number, title and comments for two preceding scenes.
Write-protected scenes are indicated by a protect symbol.
E symbol (EDIT symbol)
This symbol will appear when you edit the mix parameters for the currently-loaded scene.
This symbol indicates that you must execute the store operation if you want to keep the
changes you made.
• If you press and hold down either of the SCENE MEMORY [INC]/[DEC] keys, the scene
number will count up or down continuously. If you press and hold down either of the SCENE
MEMORY [INC]/[DEC] keys, the scene number will increment or decrement quickly.
• If you press the SCENE MEMORY [INC] and [DEC] keys simultaneously, the SCENE field
indication will return to the number of the currently-loaded scene.
• You cannot store data to a protected scene number.
Press the SCENE MEMORY [RECALL] key.
A dialog box will ask you to confirm the recall operation.
To execute the recall operation, press the OK button.
The scene you selected in step 1 will be recalled. If you decide to cancel the recall operation,
press the CANCEL button instead of the OK button.
You can make settings such that the recall confirmation dialog box will not appear
RIVAGE PM10 Operation Manual