File Saving the RIVAGE PM10 system's settings on a USB flash drive
Use these tabs to switch between SAVE and LOAD.
Saves all of the RIVAGE PM10 system internal settings together.
Press the SAVE tab to switch to the SAVE window.
If necessary, press the directory icon and change the directory.
To move to the next higher level, press the arrow button in the PATH field.
Press the SAVE button.
A keyboard window will appear, allowing you to enter a file name and comment.
Enter a file name or comment, and press the OK button.
When the file has been saved, the PROCESSING popup window that shows the progress of the
writing operation will close.
• If you are going to overwrite a file or save a file with the same name in the same folder, a
dialog will ask you to confirm the overwrite.
• You can enter a comment of up to 32 characters.
• You may enter a file name of up to 16 characters. However, the drive name, path name, and
file name are limited to a total of 256 characters. If you exceed this limit, you may be unable to
save the file, depending on the length of the file name. If this error indication appears at the
bottom of the screen, shorten the file name and try saving the file again.
RIVAGE PM10 Operation Manual