Download  Print this page

Advertisement

MIDI/GPI  Using Program Changes to recall scenes
MIDI/GPI window (PROGRAM CHANGE page)
1
2
4
1
PROGRAM CHANGE field
Switches Program Change transmission and reception on or off. This setting is linked with the
PROGRAM CHANGE field of the MIDI page.
• Tx ....................................Turn this button on to transmit the corresponding Program Change
message when a scene is recalled.
• Rx ....................................Turn this button on to recall the corresponding scene when a
Program Change message is received.
• ECHO .............................Turn this button on to transmit Program Change messages (that are
received from an external device) without modification.
2
PROGRAM CHANGE MODE field
Here you can select the Program Change transmit/receive mode. This setting is linked with the
PROGRAM CHANGE MODE field of the MIDI page.
3
List
Shows the scene recall operation assigned to each MIDI channel and MIDI Program Change
number. The list shows the following items.
• CH/BANK .....................If "CH" appears as the column heading instead of "BANK, " the
column indicates the MIDI channel (1–16) on which Program
Changes are transmitted/received. If Program Change transmission
and reception is in Single mode and the BANK button is on, this will
be labeled "BANK, " and the numerical value in this column will
correspond to the bank number.
• NO...................................Indicates the program number 1–128.
• PROGRAM CHANGE ASSIGNMENT
...........................Indicates the scene number and scene name assigned to each
4
Scroll knob
Press this knob to scroll the list upward or downward using the screen encoder.
3
5
CLEAR ALL button
Press this button to clear all scene recall assignments in the list.
4.
Use the buttons in the PROGRAM CHANGE MODE field to select the Program
Change transmission/reception mode.
You can select one of the following two Program Change transmission/reception modes.
• Multi mode (when the MULTI button is on):
Program changes of all MIDI channels will be transmitted and received. (The transmit/
5
receive channel specified in the MIDI page will be ignored.)
When a Program Change is received, the scene assigned to the corresponding MIDI channel
and program number in the list will be recalled.
When you recall a specified scene on the RIVAGE PM10 system, the Program Change of the
corresponding MIDI channel and program number in the list will be transmitted.
• Single mode (when the SINGLE button is on):
Only Program Changes of the transmit (Tx) and receive (Rx) channels specified in the MIDI
page will be transmitted and received.
When a Program Change on the Rx channel is received, the scene assigned to that program
number of the corresponding channel in the list will be recalled.
When you recall a specified scene on the RIVAGE PM10 system, the Program Change of the
corresponding program number will be transmitted on the Tx channel shown in the list. (If
an event is assigned to more than one program number on the same channel, the lowest-
numbered program number will be transmitted.)
If you turn on the OMNI button or BANK button in Single mode, operation will change as
follows.
237
CONTENTS
FUNCTION MAP
channel (bank number) or program number. Press an individual
assignment display area to open the MIDI PROGRAM CHANGE
popup window, in which you can select the content that you want to
assign.
RIVAGE PM10 Operation Manual
FAQ

Advertisement

Table of Contents

   Related Manuals for Yamaha RIVAGE PM10

Comments to this Manuals

Symbols: 0
Latest comments: