CH Parameter DELAY
DELAY popup window (CH 1-72, CH 73-144/MIX/MTX ST)
This window displays the corresponding input channels (or output channels) simultaneously. It is
useful when you want to quickly check the delay setting for multiple channels.
Channel select buttons
Enable you to select the channel that you want to operate. The current channel icon, number,
and color appear on the button.
DELAY TIME button
You can view the delay value when the delay is turned on (always displayed in units of ms on
the upper row, and in the currently-selected scale on the bottom row). Press this button to
access the DELAY TIME popup window
Use these tabs to select a channel that you want to view on the screen.
128), in which you can set the delay time.
DELAY SCALE popup window
You can select the delay scale from the following five options.
The distance in meter, calculated as the speed of sound at an air temperature of 20 °C
(343.59m/s) × the delay time (seconds).
The distance in feet, calculated as the speed of sound at an air temperature of 20 °C (68 °F)
(1127.26 feet/s) × the delay time (seconds).
SAMPLE (number of samples)
The delay time is shown as the number of samples. If you change the sampling frequency on
which the RIVAGE PM10 system operates, the number of samples will change accordingly.
The delay time is shown in units of milliseconds.
The delay time is shown in units of frames.
Use the six buttons located below the FRAME button to select the number of frames per
Closes the DELAY SCALE popup window.
RIVAGE PM10 Operation Manual