Yamaha RIVAGE PM10 Operation Manual page 57

System Setup  SYSTEM CONFIG
OMNI IN of the control surface
1
2
3
4
5 6
7
8
9
) !
1 Patch indication
Indicates the channel that is patched.
2 +48V button
Switches phantom power (+48V) on or off.
3
A.GAIN knob
Indicates the HA analog gain setting. You can use the screen encoders to make adjustments.
4
Meter
This meter indicates the level of signals after passing through analog gain.
5
SILK ON button
Switches SILK on or off.
6
RED/BLUE selection button
Switches the character of Silk processing between the powerful BLUE and the sparkling RED.
7
SILK [TEXTURE] knob
Adjusts the TEXTURE parameter of Silk.
8 HPF button
Toggles the high pass filter on or off for each port.
NOTE
This is a parameter within the I/O rack. It is different than the HPF within the channel module of
the control surface.
9 FREQUENCY knob
Sets the HPF cutoff frequency.
) M/S button
Switches the M/S decoder on or off for each pair of channels.
! S-GAIN knob
Adjusts the side gain of M/S.
57
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ