CH Parameter INSERT/D.OUT (Insert/Direct Out)
INSERT/D.OUT (Insert/Direct Out)
Each channel provides two inserts: Insert 1 and Insert 2. In each insert, you can insert up to four
plug-ins, GEQ/PEQ, or external devices (via the I/O jacks). The insert point can be freely selected
independently for INSERT 1 and INSERT 2.
For details on inserting plug-ins, refer to
For details on inserting GEQ/PEQ, refer to
"Inserting a GEQ/PEQ into a
Inserting an external device (OUTBOARD) into a channel
An external device such as an effect processor can be inserted into the signal route of each channel.
There are three ways to control the external device.
• Controlling via the Selected Channel section
• Controlling via the OVERVIEW screen
• Controlling via the SELECTED CHANNEL VIEW screen
■ Controlling via the Selected Channel section
INSERT [PLUG-INS] key
Enables you to recall a parameter setting
screen for the inserted plug-ins.
INSERT 1/2 [ON] keys
Switch the INSERT1 and INSERT2 on
or off respectively.
Select the channel that you want to operate.
Press the INSERT [PLUG–INS] key to access the INSERT screen.
INSERT 1/2 switch button
Switches between INSERT1 and INSERT2.
INSERT block [A]–[D] buttons
Indicate four plug-ins that have been assigned to INSERT1 and INSERT2 respectively.
Press this button to display the edit screen for the assigned plug-in.
MOUNT popup button
Press this button to display the Mount popup window.
Use the INSERT 1/2 switch button and INSERT [A]–[D] buttons to select an insert
channel and block for which you want to assign the external device.
Press the MOUNT popup button to access the MOUNT popup window.
RIVAGE PM10 Operation Manual