Yamaha RIVAGE PM10 Operation Manual page 186

Recording  2-track USB recorder
• Recording mode ........................ Recording-pause mode
• Recording-pause mode ............ Recording mode, and then recording will resume from the
paused point.
9 FF button
Moves the playback point to the beginning of the next song that is marked with a PLAY check
symbol.
If you press and hold down this button for two seconds or longer, the song will fast-forward.
If you operate this button during playback, playback will resume from the point at which the
button is released.
) REC
Places the recorder in recording standby mode.
The pause indicator on the PLAY/PAUSE (
NOTE
You can also assign the function of each button to USER DEFINED keys
■ PLAY MODE field
Enables you to specify how the recorder will behave when playback of the current song is complete.
! SINGLE button
If this button is on, only the current song will play.
If this button is off, when the current song finishes playing, the recorder will play the next song
in the list that is marked with a PLAY check symbol.
@ REPEAT button
If this button is on, playback will repeat. If the SINGLE button is on, only the current song will
play repeatedly. If the SINGLE button is off, all songs in the list that are marked with a PLAY
check symbol will repeatedly play in the order of the list.
If this is off, the song will play only once. If the SINGLE button is on, the current song will play
only once, and then stop. If the SINGLE button is off, all songs in the list that are marked with
a PLAY check symbol will play once in the order of the list, and then playback will stop.
3.
Connect a USB flash drive with sufficient free capacity to the RECORDING
connector.
The FREE SIZE field indicates the amount of free capacity. When you connect a USB flash
drive to the RECORDING connector, a YPE folder and a SONGS folder within that YPE folder
will be created automatically in the root directory of the USB flash drive.
The files created by recording operations will be saved in the above SONGS folder, or in the
currently-selected folder below that level.
) button will light.
(page 232).
■ Directory structure of a USB flash drive
When you connect a USB flash drive to the USB connector, a YPE folder and a SONGS folder within
that YPE folder will be created automatically in the root directory of the USB flash drive.
The files created by recording operations will be saved in the above SONGS folder, or in the
currently-selected folder below that level.
YPE folder
Root directory
4.
Assign desired channels to the input and output of the USB memory recorder
(page 183).
5.
To monitor the signal being recorded, raise the fader for the channel(s) that are
patched to the input of the recorder.
The level of the input signal to the recorder is shown by the RECORDER INPUT field's level
meter in the RECORDER screen. If necessary, use the GAIN knob in the RECORDER INPUT
field to adjust the input level to the recorder.
NOTE
• The signal being recorded will not be output from the recorder's output jacks (PLAYBACK
OUT).
• Operating the GAIN knob will not affect the level of the signal being output to other ports from
the corresponding output channel.
6.
Press the REC FORMAT/RATE field in the lower right of the screen, then select
the file format and sampling rate for the audio file that will be recorded.
186
CONTENTS FUNCTION MAP
SONGS folder
Song
(audio file)
RIVAGE PM10 Operation Manual
FAQ