Download  Print this page

Advertisement

Channel Job  Initializing channels

Initializing channels

You can restore the parameters of a channel to an initialized state. This operation can be performed
on any channel(s).
1.
Press the CH JOB button on the menu bar, and then select CH DEFAULT.
The CH DEFAULT popup window will appear.
CH DEFAULT popup window
This popup window enables you to initialize parameters.
1
2
5
4
3
1
DEFAULT button
After selecting the channel, press this button to execute the initialization operation.
2
Channel display select buttons
Select the type of channels that you want to view on the screen. Available options are CH1-72,
CH73-144, MIX, and ST/MTRX.
3
ASSIGN section
Enables you to select the channels for which you want to restore parameters to their initial
values.
4
SET BY SEL button
If this button is on, you will be able to select a channel by using the corresponding [SEL] key.
5
CLOSE button
Press this button to close the popup window and return to the previous screen.
2.
Select the channel(s) that you want to initialize (multiple selections are
allowed).
The corresponding channel will be highlighted.
3.
To execute the initialization, press the DEFAULT button.
A dialog box will ask you to confirm the Initialization operation.
4.
Press the OK button in the confirmation dialog box.
The parameters of the selected channel(s) will be initialized.
5.
To close the CH DEFAULT popup window, press the CLOSE button.
146
CONTENTS
FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ

Advertisement

Table of Contents

   Related Manuals for Yamaha RIVAGE PM10

Comments to this Manuals

Symbols: 0
Latest comments: