Download  Print this page

Advertisement

CH Parameter  DYNAMICS
If the dynamics processor is any type other than GATE, the threshold setting is indicated as a
horizontal line in the meter area.
Type = Any type
Type = GATE
other than GATE
If GATE is selected as the dynamics processor type, the indicator status means the following:
Gate status
indicator
Red
On/Off status
On
Open/Close status
Close
Amount of gain
30 dB or higher
reduction
3
Tabs
Use these tabs to select a channel that you want to view on the screen.
Yellow
Green
Dark
On
On
Off
Open
Open
Lower than 30 dB
0 dB
■ Controlling the dynamics processor via the SELECTED CHANNEL VIEW
screen
1.
Press the [VIEW] key to access the SELECTED CHANNEL VIEW screen.
SELECTED CHANNEL VIEW screen
2.
Select the channel that you want to operate.
3.
Press the DYNAMICS field to access the DYNAMICS 1/2 popup window
(page
115).
4.
Use the corresponding screen encoder or the [TOUCH AND TURN] knob to
adjust the EQ parameters.
117
CONTENTS
FUNCTION MAP
DYNAMICS field
RIVAGE PM10 Operation Manual
FAQ

Advertisement

Table of Contents

   Related Manuals for Yamaha RIVAGE PM10

Comments to this Manuals

Symbols: 0
Latest comments: