System Setup SYSTEM CONFIG
When you finish making assignments, press the × button to close the
I/O rack settings popup window.
If channels are assigned, and you press the × button without pressing the APPLY button, the
following confirmation screen will appear.
If you press OK, you will return to the SYSTEM CONFIG popup window without applying the
If you press CANCEL, you will return to the I/O rack settings popup window.
For a DSP engine
Press the SETUP button on the menu bar to access the SETUP screen.
Press the SYSTEM CONFIG button to access the SYSTEM CONFIG popup
Press the DSP button to access the SYSTEM CONFIG [DSP] popup window.
DSP popup button
This button represents the DSP engine that is connected to the system. The row at the top of
the button shows the icon of the device and the power supply status of POWER A and B
(green: power on, red: power off).
Channel assign popup buttons (MIX 1–72)
When you press a button, a TWINLANe CONFIGURATION popup window appears, in
which you can assign the MIX channel to the TWINLANe network
Channel assign popup buttons (STEREO/MATRIX/MONITOR/CUE/TB)
When you press a button, an TWINLANe CONFIGURATION popup window appears, in
which you can assign the STEREO channel, MATRIX channel, MONITOR, CUE, or
TALKBACK to the TWINLANe network
RIVAGE PM10 Operation Manual