User Setup USER DEFINED KNOBS
Make sure that the FUNCTION field is enclosed by a frame, and then use the
screen encoder on the panel to select the function that you want to assign.
For details on the assignable functions and their parameters, refer to the data list.
If the selected function features parameters, specify the type of parameter you
want to assign by selecting in the following order: PARAMETER1 field
Press the OK button to close the popup window.
Assign the desired functions to other USER DEFINED knobs in the same way.
Using a channel strip encoder
You can assign up to five functions to the channel strip encoder of each channel strip, and switch the
functions to control.
Channel strip encoder
Channel strip encoder display
Indicates the function that has been
assigned to the channel strip encoder.
UP /DOWN  keys
Enable you to select the function that
you want to control using the channel
RIVAGE PM10 Operation Manual