Adjusting The Input/Output Gain - Yamaha RIVAGE PM10 Operation Manual

Maintenance  Adjusting the input/output gain

Adjusting the input/output gain

If necessary, you can make fine adjustments to the input and output gain.
1.
Press the SETUP button on the menu bar to access the SETUP screen.
2.
Press the MAINTENANCE button to access the MAINTENANCE popup window.
This window includes several pages, which you can switch between using the tabs located at
the top of the window.
3.
Press the PORT TRIM tab to access the PORT TRIM page.
1
1
Component select buttons
Enables you to select a component.
2
Port select buttons
Enables you to select a port.
3
PORT TRIM knobs
Adjust the gain.
• INPUT PORT (Fine adjustment of the analog input gain)
This makes fine adjustments in 0.1 dB steps to the gain of the specified analog input port.
• OUTPUT PORT (Fine adjustment of the output ports)
This makes fine adjustments in 0.01 dB steps to the output port gain of the specified slot.
4.
Select a component and port for which you want to adjust the input/output
gain.
5.
Press an on-screen knob to select it, and then use the corresponding screen
encoder to adjust the value.
6.
Press the CLOSE button.
252
CONTENTS FUNCTION MAP
3
RIVAGE PM10 Operation Manual
FAQ
2