Yamaha RIVAGE PM10 Operation Manual page 159

Plug-ins  Using plug-ins
2 INPUT popup buttons (L/R)
Press these buttons to access the INPUT PATCH popup window, in which you can select a
signal to patch to the L/R channel.
3 RACK MOUNT popup button
Press this button to display the RACK MOUNT popup window, in which you can select a
plug-in to mount.
4
OUTPUT popup buttons (L/R)
Press these buttons to access the OUTPUT PATCH popup window, in which you can select a
signal to patch to the L/R channel.
3.
Press the RACK MOUNT popup button.
The RACK MOUNT popup window appears.
1
2
The window contains the following items.
1 Category select tabs
Enable you to select the category of plug-in that will be mounted in the rack.
2 BLANK button
Unmounts the plug-in from the rack.
3 PLUG-IN select buttons
Select the plug-in that will be mounted in the rack.
3 4 5
4 PLUG-IN DSP USAGE indication
Shows the state of plug-in resource usage.
5 OPTIMIZE button
Press this button to optimize the plug-in's mounting status.
4.
In the RACK MOUNT popup window, use the PLUG-IN select buttons to select
the item you want to mount, and then press the OK button.
You will return to the RACK&REC screen.
5.
Press the INPUT popup button.
6.
In the INPUT PATCH popup window, select the input source and then press the x
button to close the window.
7.
Press the OUTPUT popup button.
8.
In the OUTPUT PATCH popup window, select the output destination and then
press the x button to close the window.
159
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ