Yamaha RIVAGE PM10 Operation Manual page 76

Monitor  MONITOR
6 MONITOR OUT MODE
This section enables you to select one of the following monitor output modes:
• LR + C DOWNMIX
In this mode, the L/C/R channel signals will be downmixed and output in stereo.
• MONO
In this mode, monitor signals will be output in monaural.
• LCR
In this mode, the L/C/R channel signals will be output.
7 CENTER CH ON button
If you plan not to monitor the center channel, turn this button off. If this button is off, the
center channel will not be included in the downmix signal.
8 INSERT button
Press this button to display the window, in which you can insert plug-ins into the monitor
signal.
9 INSERT ON button
Switches the plug-in insert on or off. The currently-specified plug-ins are displayed to the left
of the button.
)
EQ field
• EQ graph
This field graphically indicates the approximate response of the EQ. Press this field to open
the window, in which you can set the EQ parameters.
• EQ ON button
Switches the EQ on/off.
! OUTPUT PATCH popup buttons
Indicate the monitor output destination slot or port for the L, C and R channels respectively.
Press these buttons to access the OUTPUT PATCH popup window.
@ MONITOR OUTPUT button
Switches Monitor Out on or off.
# MONITOR FADER LEVEL knobs
Adjusts the monitor fader level.
$ DIMMER ON CUE knob
Adjusts the amount by which the monitor signal will be attenuated when cue is on.
DIMMER ON CUE indicators
When cue is active, CUE A and/or CUE B will light.
%
DIMMER LEVEL knob
Adjusts the amount by which the monitor signal will be attenuated when dimmer is on.
^
DIMMER ON button
Turn on this button to enable the dimmer function and attenuate the monitor signal.
&
DIMMER ON TALKBACK LEVEL knob
Adjusts the amount by which the monitor signal will be attenuated when talkback is on.
*
DIMMER ON TALKBACK indicator
Indicates the on/off status of the talkback dimmer function.
(
Tabs
Use these tabs to switch between the MONITOR SETTINGS popup window and MONITOR
SOURCE popup window.
76
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ