User Setup USER DEFINED KNOBS
Assigning a function to a USER DEFINED knob
Press the SETUP button on the menu bar to access the SETUP screen.
Press the USER DEFINED KNOBS button to open the USER DEFINED KNOBS
Enable you to select the bank ([A], [B], [C], or [D]) for the USER DEFINED knobs.
USER DEFINED KNOBS –
Link to USER DEFINED knobs – on the panel. Press one of these buttons to access the
USER DEFINED KNOBS SETUP popup window, in which you can assign a function to the
If nothing is assigned to the button, an indication of "NO ASSIGN" is shown.
Press the button corresponding to the USER DEFINED knob to which you want
to assign a function.
The system displays a popup window, in which you can assign a function to the USER
RIVAGE PM10 Operation Manual