Mixer Setup - Yamaha 03D Technical Notes

Revision #03

Mixer Setup

1. Connect the serial control cable from a Fastrack VS "COM" or "P#" port to the 6-pin "TO
HOST" serial port on the rear of the 03D console.
2. At the 03D control panel "SETUP" section (top, left of the mixer), press the [UTILITY]
button until the "MIDI / HOST" tab is selected.
3. At the "MIDI / HOST" tab, use the cursor buttons (under the PARAMETER wheel) to select,
and then press the [ENTER] button, to accept the following:
Rear view of the 03D panel
Optional AES YGADI inputs/outputs (not shown) would be at lower right of above image.
Page 3 of 7 02/07/2003
Editware Technical Note
Fastrack VS and the Yamaha 03D Audio Mixer