Yamaha RIVAGE PM10 Operation Manual page 140

Channel Job  About DCAs
■ Selecting the DCAs to which a specific channel will belong
1.
Press the DCA/MUTE ASSIGN field on the OVERVIEW screen, or press the DCA
ASSIGN field on the SELECTED CHANNEL VIEW screen to open the DCA/MUTE
ASSIGN popup window (for 1CH).
DCA/MUTE ASSIGN field on
the OVERVIEW screen
DCA/MUTE ASSIGN field
DCA/MUTE ASSIGN window (1CH)
This window enables you to view and edit the DCAs to which each channel is assigned.
1
1 Tabs
Use these tabs to select the 1CH, ALL DCA, or ALL MUTE window.
2 Channel select +/– buttons
Indicates the currently-selected channel. Press the + button to select the next channel. Press
the – button to select the previous channel.
3 DCA ASSIGN buttons
Press a button to assign the selected channel to the corresponding DCA.
2.
Use the channel select +/– buttons to select the channel that is assigned to a
DCA.
3.
Press a DCA ASSIGN button(s) to select the DCA(s) to which the currently-
selected channel will be assigned (multiple selections are allowed).
4.
Select the DCA(s) for other channels in the same way.
140
CONTENTS FUNCTION MAP
2 3
RIVAGE PM10 Operation Manual
FAQ