Meters - Yamaha RIVAGE PM10 Operation Manual

Meters  About the meter area

Meters

This chapter explains how to operate the METER screen that shows the input and output level
meters for all channels.
About the meter area
The meter area displays various meters. Press any part of the meter area to recall the corresponding
fader layer to the panel.
1
2
Σ clipping indicator
1
Lights to indicate that a signal is clipping at some point in the channel.
2
OVER indicator
Lights to indicate that a signal is clipping at the metering point of the channel.
NOTE
To switch the metering point, use the METERING POINT field (page 104).
102
To display the meter area, press the meter icon button located on the right end of the menu bar to
open the meter menu, in which you can select INPUT meter, OUTPUT meter, or IN/OUT meter.
Menu bar
Input meter
This screen shows the meters for all input channels, Stereo A/B, and Cue A/B simultaneously.
Output meter
This screen shows the meters for all output channels, Stereo A/B, and Cue A/B simultaneously.
IN/OUT meter
This screen shows the meters for all input channels, output channels, Stereo A/B, and Cue A/B
simultaneously.
NOTE
If you press part of the cue meters when the cue is on, the cue will be canceled.
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ