Download  Print this page

Advertisement

Scene Memory  Recalling a scene
)
STORE button
Stores the current mix data. Press this button to access the SCENE STORE popup window,
which will enable you to assign a name to a scene and store it.
!
UPDATE button
Updates scene data by overwriting the scene (that has been recalled or stored most recently)
with the current mix data.
@
RECALL button
Press this button to recall the currently-selected scene.
#
UPDATE UNDO button
Undoes the store operation. This button is valid only immediately after you perform an
overwrite-store operation.
$
RECALL UNDO button
Undoes the recall operation. This button is valid only immediately after you perform a recall
operation.
%
Page switching tabs
Switch the views for the right side of the SCENE LIST screen.
3.
Press the SCENE STORE button.
The SCENE STORE window will appear, enabling you to assign a title or comment to the
scene.
4.
Enter a scene number as the store-destination.
To enter an integer, rotate the CH1 screen encoder. To enter a decimal portion, rotate the CH2
screen encoder.
NOTE
You can also use the SCENE MEMORY [INC]/[DEC] keys to select scene numbers. To select a
decimal portion, hold down the [SHIFT] key and use the SCENE MEMORY [INC]/[DEC] keys.
A yellow scene number indicates that the scene number has already been used.
A red scene number indicates that the scene number has already been used and protected.
5.
Assign a title or comment to the scene as desired.
6.
Press the OK button located at the bottom of the SCENE STORE window.
A dialog box will ask you to confirm the store operation.
7.
To execute the store operation, press the OK button.
The current mix data will be stored to the scene number you selected in step 4. If you decide to
cancel the store operation, press the CANCEL button instead of the OK button.
8.
If you want to cancel the overwrite-store operation that you just performed,
press the UPDATE UNDO button.
Immediately after overwrite-storing a scene, you can use the UPDATE UNDO button to undo
(cancel) the scene store operation that was executed most recently. When you press the
UPDATE UNDO button, a dialog box will ask you to confirm the undo operation. Press the
OK button if you want to execute the undo operation.
NOTE
The UPDATE UNDO button is available only immediately after overwrite-storing.
201
CONTENTS
FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ

Advertisement

Table of Contents

   Related Manuals for Yamaha RIVAGE PM10

Comments to this Manuals

Symbols: 0
Latest comments: