CH Parameter DELAY
Each input/output channel features a channel delay of up to 1000 msec. You can select the delay time
unit from the following: meter, feet, sample, msec, frame, depending on your application. You can
also specify insert points for the delay on each channel individually.
There are three ways to set the delay:
• Controlling the delay via the Selected Channel section
• Controlling the delay via the OVERVIEW screen
• Controlling the delay via the SELECTED CHANNEL VIEW screen
■ Controlling the delay via the Selected Channel section
Use a [SEL] key to select the channel you want to control.
Turn on the DELAY [ON] key in the Selected Channel section.
Use the [DELAY] knob to adjust the DELAY value.
DELAY [ON] key
Switches the delay on or off.
Indicates the delay value.
Sets the delay value.
RIVAGE PM10 Operation Manual