System Setup BUS SETUP
The screen contains the following items.
SIGNAL TYPE switch buttons
Enable you to select how signals are processed for every adjacent pair of buses. You can select
either STEREO (stereo signal) or MONOx2 (monaural signal x 2).
BUS TYPE select buttons
Enable you to select the bus type for every adjacent pair of buses. You can select VARI (variable
send level) or FIXED (fixed send level).
PAN LINK button
This button will be displayed only if SIGNAL TYPE is STEREO and set to VARI.
If the button is on, the signals routed to the corresponding channels will link with the TO
STEREO pan setting.
Enable you to select MIX1-36, MIX37-72, or MATRIX bus.
Use the tabs to display the buses for which you want to edit the settings.
Use the SIGNAL TYPE switch buttons to specify whether each bus will function
as STEREO (main parameters will be linked for two adjacent odd-numbered/
even-numbered buses) or MONOx2 (use as two monaural channels).
Use the BUS TYPE select buttons to select the bus type.
RIVAGE PM10 Operation Manual