Console Lock; Locking The Console - Yamaha RIVAGE PM10 Operation Manual

Panel Settings  Console Lock

Console Lock

You can temporarily prohibit console operations in order to prevent unwanted operation. This
setting completely disables operations of the panel and touch screen, so that controllers cannot be
operated by an accidental touch or by an unauthorized third party while the operator is taking a
break.
NOTE
• If you forget the password and cannot defeat Console Lock, turn the power to the console off and
then on to unlock it.
• Even while the console is locked, control from an external device via MIDI will still operate as usual.

Locking the console

1.
Press the SETUP button on the menu bar to access the SETUP screen.
2.
Press the CONSOLE LOCK button to access the PASSWORD popup window.
1
2
3
1 PASSWORD field
2 RE-ENTER PASSWORD field
Enter the password once again.
3 REMEMBER THIS PASSWORD button
If this button is on, you will need to use the same password next time.
3.
If you do not set the password, press the OK button.
If you set the password, proceed to step 4.
4.
Enter the password in the PASSWORD field, then enter the same password in
the RE-ENTER PASSWORD field for verification, and finally press the OK button.
The CONSOLE LOCK screen will appear, the Console Lock function will be enabled, and all
controllers (excluding the MONITOR A/B knobs, TALKBACK LEVEL knob, PHONES A/B
LEVEL knobs, and brightness control knob) will become inoperable.
256
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ