Bay All; Bay; Parameter 1; Description - Yamaha RIVAGE PM Series Supplemental Manual

New functions added to the USER DEFINED keys, USER DEFINED knobs, and [Fn] keys
The following operations are always applied to the main screen (BAY R).
• Switching to full screen display (zoom)
• Pressing the [ESC] key repeatedly to toggle between the OVERVIEW screen and the
SELECTED CHANNEL VIEW screen (The [F2] key is effective on all windows.)
You can also use PM editor to set the following screens for version 3 or later units.
MIDI/GPI [CS] screen

SURFACE SETTING2 screen

* The BAY LINK setting configured on the control surface will not affect PM Editor, but does affect
the SEL LINK setting. CUE OPERATION MODE is a dedicated PM Editor setting.
SURFACE SETTINGS1 screen*
SCREEN SETTINGS screen
New functions added to the USER
DEFINED keys, USER DEFINED knobs, and
[Fn] keys
■ USER DEFINED keys

You can now assign the following functions to these keys:

Function

PARAMETER 1

DSP ACTIVATE A
DSP MIRRORING
DSP ACTIVATE B
INPUT A/B SPECIFIC CH
OSCILLATOR SEL CH ASSIGN
28
CONTENTS
PARAMETER 2 PARAMETER 3

Description

Switches the specified
DSP engine to active.
Assigning this function to
GPI IN will automatically
--- ---
switch the second engine
to active in the event that
the originally-active
engine's power fails.
Switches between input
CH1–144 --- patch A and B for the
selected channel.

BAY ALL

While holding down this
key, press a [SEL] key to
---
switch the assignment
*1
BAY C
*2
on/off.
RIVAGE PM series V3 Supplemental Manual