Download  Print this page

Advertisement

System Setup  BUS SETUP
INTERNAL: Select this option if the clock is not supplied from another system. At this time,
the slave DSP engine will become the master, and use the internal clock frequency of the
original master DSP engine.
Normal internal operation
I/O rack
I/O rack
Supplying
word clock
DSP engine
DSP engine
DSP1 (Master)
DSP2 (Slave)
INTERNAL
HY SLOT1
WORD CLOCK IN: Select this option if the system is receiving the clock from another system
via the WORD CLOCK IN connector, or if the system is sharing the clock generator with
another system via the WORD CLOCK IN connector.
At this time, the slave DSP engine will become the master, and use the frequency of the word
clock being supplied via the rear panel WORD CLOCK IN connector. (This frequency is the
same as that of WORD CLOCK IN specified for the original master DSP engine.) At first, you
must input the same clock to the DSP1 (master) and the DSP2 (slave) devices.
Normal WORD CLOCK IN operation
I/O rack
I/O rack
Supplying
word clock
DSP engine
DSP engine
DSP1 (Master)
DSP2 (Slave)
WORD CLOCK IN
HY SLOT1
Word clock
generator,
Always input
etc.
3.
In the MASTER CLOCK SELECT field, select a clock source.
A confirmation dialog box will appear if you attempt to change the clock source setting.
4.
To close the WORD CLOCK popup window, press the "x" symbol located in the
upper right.
The system will return to the SETUP screen.
Abnormal master DSP engine operation
I/O rack
I/O rack
Supplying
word clock
DSP engine
DSP engine
DSP1 (Master)
DSP2 (Slave)
INTERNAL
INTERNAL
Abnormal master DSP engine operation
I/O rack
I/O rack
Supplying
word clock
DSP engine
DSP engine
DSP1 (Master)
DSP2 (Slave)
WORD CLOCK IN
WORD CLOCK
Word clock
generator,
Always input
etc.

BUS SETUP

BUS SETUP (Basic settings for MIX buses and MATRIX buses)
This section explains how to edit the basic settings for MIX buses and MATRIX buses, such as
switching between stereo and monaural, or changing the bus type.
The settings you make in the following procedure are saved as part of the scene.
1.
Press the SETUP button to access the SETUP screen.
2.
Press the BUS SETUP button to open the BUS SETUP popup window.
This window includes several pages, which you can switch between using the tabs located at
the top of the window.
3.
Press the BUS SETUP tab.
65
CONTENTS
FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ

Advertisement

Table of Contents

   Related Manuals for Yamaha RIVAGE PM10

Comments to this Manuals

Symbols: 0
Latest comments: