Download  Print this page

Advertisement

CH Parameter  INSERT/D.OUT (Insert/Direct Out)
INSERT/D.OUT popup window (12CH INSERT 1, 12CH INSERT 2)
1
2
3
1
INSERT ON button
Switches the insert on/off.
2
INSERT POINT
Enables you to select the signal source point from the following:
Input channels:
PRE FILTER, PRE EQ, PRE DYN1, PRE DYN2, PRE FADER, POST ON
Output Channels: PRE FILTER, PRE EQ, PRE DYNA, PRE DELAY, PRE FADER, POST ON
3
INSERT block [A]–[D] buttons
These buttons represent four plug-ins that have been assigned to INSERT1 and INSERT2
respectively.
Press this button to display the edit screen for the assigned plug-in.
3.
Press the INSERT block button to which you want to assign the external device:
The MOUNT screen appears.
4.
Follow steps 5–11 on
page
119.
■ Controlling via the SELECTED CHANNEL VIEW screen
1.
Select the channel that you want to operate.
2.
Press the [VIEW] key to access the SELECTED CHANNEL VIEW screen.
SELECTED CHANNEL VIEW screen
3.
Press the INSERT field to access the MOUNT screen.
4.
Follow steps 5–11 on
page
121
CONTENTS
FUNCTION MAP
INSERT field
119.
RIVAGE PM10 Operation Manual
FAQ

Advertisement

Table of Contents

   Related Manuals for Yamaha RIVAGE PM10

Comments to this Manuals

Symbols: 0
Latest comments: