Yamaha RIVAGE PM10 Operation Manual page 9

Part Names & Functions  Top panel of the control surface (CS-R10)
EQUALIZER
2
1
3
4
5
7
6
LPF/HPF
1 3
2
4
1
EQUALIZER [1-4]/[(5-8)] keys
Switch the EQ bands for which you want to
make settings.
Pressing both [1-4] and [5-8] keys
simultaneously will set the gain for all bands to
0 (FLAT).
2 EQUALIZER [ON] key
Switches EQ on or off.
3 EQUALIZER [SHELF] key
Switches peaking filter to shelving filter.
4 EQ display
Indicates parameters for each EQ band.
5 EQUALIZER [Q] knob
Specifies the Q value.
6 EQUALIZER [FREQUENCY] knob
Sets the frequency.
7 EQUALIZER [GAIN] knob
Sets the gain.
1
LPF/HPF [FREQUENCY] knobs
Specify the cutoff frequency of LPF and HPF
respectively.
2 LPF/HPF display
Indicates the LPF and HPF settings.
3 LPF/HPF [ON] keys
Switch the LPF and HPF on or off respectively.
4 LPF/HPF [SLOPE] keys
Switch the LPF and HPF slope settings
respectively.
DCA/MUTE/INSERT
1
2
3 4
DYNAMICS
5
1 2 4
3
9
CONTENTS FUNCTION MAP
1
DCA ASSIGN LEDs
Indicate the assigned DCAs.
2
MUTE GROUP ASSIGN LEDs
Indicate the assigned Mute Groups.
3
INSERT [PLUG-INS] key
Enables you to recall a parameter setting screen for
the inserted plug-ins.
4 INSERT 1/2 [ON] keys
Switch the INSERT1 and INSERT2 on or off
respectively.
1 DYNAMICS 1/2 IN LED
6
Indicates the Dynamics input level.
2
DYNAMICS 1/2 GR LED
Indicates the amount of Dynamics
gain reduction.
3 DYNAMICS 1/2 [<]/[>] keys
Switch parameters that are indicated
on the DYNAMICS display.
4
DYNAMICS 1/2 setting knobs
Set parameters that are indicated on
the DYNAMICS display.
5 DYNAMICS 1/2 display
Indicates the Dynamics parameters.
6 DYNAMICS 1/2 [ON] key
Switches Dynamics on or off.
RIVAGE PM10 Operation Manual
FAQ