Part Names & Functions Top panel of the control surface (CS-R10)
Indicate the channel level.
Indicate the status of Dynamics 1 and 2.
Switches the channel on or off. If the channel is on, the key LED will light. In SENDS ON
FADER mode, this key works as an on/off switch for signals sent from each channel to the
currently-selected MIX/MATRIX bus.
Channel name display
Indicates the channel name, fader level, etc.
Channel color indicator
Indicates the channel color. You can select the channel color from eleven options including
This is a touch-sensitive 100mm motorized fader. In SENDS ON FADER mode, this fader
adjusts the send level of the signal sent from each channel to the currently-selected MIX/
SAFE R indicator
Lights if the channel is set to Recall Safe.
SAFE M indicator
Lights if the channel is set to Mute Safe.
Lights if the channel is "Isolated. "
Selects the channel for cue.
Lights when the Pinning function for the
[TOUCH AND TURN] knob is ON.
(This feature will be supported by a future
[TOUCH AND TURN] knob
Controls the parameter of the knob you are
touching on the touch screen. The color of the
LED beneath this knob will match the color of
the selected knob on the touch screen.
Channel strip encoder display
Indicates the function that has been assigned
to the channel strip encoder.
UP [U]/DOWN [D] keys
Enable you to select the function that you want
to control using the channel strip encoder.
Combine with another key to perform a
The following table shows examples of using
the [SHIFT] key combined with another key.
Press and hold down
To switch cues as the
the [SHIFT] key and
(A ➝ B ➝ A&B ➝ A)
[SENDS ON FADER] key
Turns SENDS ON FADER mode on and off.
INPUT [1-72]/[73-144] keys
Enable you to select an input layer.
OUTPUT [MIX]/[MATRIX] keys
Enable you to select an output layer.
RIVAGE PM10 Operation Manual