Part Names & Functions Front panel of the control surface (CS-R10)
Enables you to select a DCA layer.
CUSTOM / keys
Enable you to select a custom layer. You can assign custom faders of two banks (total of 12
layers) to each custom layer.
Indicates the selected layer.
Layer Select [A]/[B]/[C]/[D]/[E]/[F] keys
Enable you to select a layer.
Recalls a group of settings. Press and hold down this key to store the following settings:
• Current screen
• Selected channel/parameter on the screen
• Selected layer
Front panel of the control surface (CS-R10)
Brightness control knob
Adjusts brightness of the light below the console.
To use the hanger, pull out the knob, and then turn it counter-clockwise. (The hanger will be
locked in place.)
To put away the hanger, turn the knob clockwise to unlock it, and then push it in.
PHONES A/B [LEVEL] knobs
Adjust the level of the signal output from the PHONES OUT jacks respectively.
PHONES A/B output jacks
These are headphone jacks for monitoring the MONITOR or CUE signal.
RIVAGE PM10 Operation Manual