Download  Print this page

Using The Selected Channel Section To Make Send Settings - Yamaha RIVAGE PM10 Operation Manual

Hide thumbs

Advertisement

CH Parameter  SENDS TO/SENDS FROM

Using the Selected Channel section to make send settings

You can use the knobs of the Selected Channel section to adjust the send levels.
MIX/MATRIX SEND section
2
4
3
5
6
1
MIX/MATRIX knobs
Adjust the send levels for the
corresponding buses.
2
MIX/MATRIX SENDS [PRE]
keys
Toggle the send point between
PRE and POST. If a key lights up,
the send point is set to PRE.
1
3
MIX/MATRIX SENDS [ON]
keys
Switch the send signal to the
corresponding bus on or off.
4
MIX/MATRIX SENDS display
Indicates the corresponding bus.
5
MIX/MATRIX SENDS [MIX]/
[MATRIX] keys
Switch the type of the send
destination bus.
6
MIX/MATRIX SENDS [1-12]/
[13-24]/[25-36]/[37-48]/
[49-60]/[61-72] keys
Selects a bank for the send
destination bus.
1.
Verify that an output port is assigned to the MIX/MATRIX bus to which the
signal is sent, and that the corresponding output port is connected to the
monitor system or an external effect processor.
2.
Use the top panel [SEL] keys to select the channel that will send a signal to the
MIX/MATRIX bus.
3.
Press the MIX/MATRIX SENDS [PRE] key to switch the send point to PRE or
POST.
NOTE
If the send destination is set to FIXED, the MIX/MATRIX SENDS [PRE] key is unavailable.
4.
Press the MIX/MATRIX SENDS [ON] key to turn it on.
5.
Use the MIX/MATRIX SENDS knobs of the Selected Channel section to adjust
the send levels to the MIX/MATRIX buses.
NOTE
• If the send-destination bus is stereo, the left knob adjusts the pan/balance and the right knob
adjusts the send level.
• To monitor the signal that is being sent to a specific MIX/MATRIX bus, recall the
corresponding MIX/MATRIX channel and press the corresponding [CUE] key.
6.
Use the top panel [SEL] keys to switch channels, and adjust the send levels to all
MIX/MATRIX buses in the same way.
132
CONTENTS
FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ

Advertisement

Table of Contents

   Related Manuals for Yamaha RIVAGE PM10

Comments to this Manuals

Symbols: 0
Latest comments: