CH Parameter GAIN/SILK
■ Controlling via the OVERVIEW screen
Press the [VIEW] key to access the OVERVIEW screen.
Select the channel that you want to operate.
Press the ANALOG GAIN knob or the SILK field to open the GAIN/SILK popup
ANALOG GAIN knob in
the OVERVIEW screen
SILK field in the
GAIN/SILK popup window
Channel select button
Indicates the channel. Press the button to select the on-screen selected channel. The icon,
number, and color of the current channel appear on the button, and the channel name appears
below the button.
Displays the channel's patch status.
Switches the HA phantom power (+48V) on or off.
A. GAIN knob
Indicates the HA analog gain setting. Use the screen encoder to adjust the value. If gain
compensation is on, an indicator shows the analog gain position at the time that gain
compensation was turned on.
Displays the level (PRE GC) of the HA input signal.
SILK ON button
Switches Silk on or off.
BLUE/RED switch button
Toggles between BLUE and RED: "BLUE" for solidity and power, and "RED" for sparkling
SILK [TEXTURE] knob
Adjusts the TEXTURE parameter of Silk.
GC (GAIN COMPENSATION) button
Switches the gain compensation on or off for that channel.
Indicates the high pass filter on/off status for each port.
Indicates the digital gain setting. Use the screen encoder to adjust the value.
Meter (channel input)
This meter indicates the level after passing through GC (before D.GAIN).
Meter (post digital gain)
This meter indicates the level after passing through digital gain.
Switches the phase of the input signal.
RIVAGE PM10 Operation Manual