Scene Memory Storing, updating, and recalling scenes
Storing a scene
The current mix data on the RIVAGE PM10 system can be saved as new scene data, or overwritten
onto existing scene data to update it.
Press the SCENE MEMORY [STORE] key.
The SCENE STORE window will appear, enabling you to
assign a title or comment to the scene.
• When you press the SCENE MEMORY [STORE] key, the system automatically suggests a
scene number and name
• If you want to store the scene as a sub scene
key, and press the SCENE MEMORY [STORE] key.
Press this field to select it, and then enter a scene number. If you enter a number that already
exists for another scene, that scene will be overwritten.
SCENE TITLE field
Press this field to select it, and enter a title for the scene (maximum 16 characters).
196), press and hold down the [SHIFT]
Press this field to select it, and enter a comment for the scene. You can use this as a
memorandum for each scene (maximum 128 characters).
Enter a scene number as the store-destination.
To enter an integer, use the CH1 screen encoder. To enter a decimal portion, use the CH2
Assign a title or comment to the scene as desired.
For details on entering text, refer to
Press the SCENE MEMORY [STORE] key or the OK button on the touch screen.
A dialog box will ask you to confirm the store operation.
To execute the store operation, press the OK button.
The current mix data will be stored to the scene number you selected in step 2. If you decide to
cancel the store operation, press the CANCEL button instead of the OK button.
You can make settings such that the store confirmation dialog box will not appear
this case, pressing the SCENE MEMORY [STORE] key once will display the SCENE STORE
window as usual, and pressing it once again will execute the store operation.
RIVAGE PM10 Operation Manual