Yamaha RIVAGE PM10 Operation Manual page 37

Screen Overview  About the SELECTED CHANNEL VIEW screen
5 HIGH SHELVING ON/OFF button
Turn on this button to switch the HIGH band to a shelving type filter.
6 LOW SHELVING ON/OFF button
Turn on this button to switch the LOW band to a shelving type filter.
7
BYP (BYPASS) button
Temporarily bypasses the EQ for each band.
8
EQ parameter setting knobs
Indicate the Q, FREQUENCY, and GAIN parameters for each band. Press these knobs, and
you will be able to use the screen encoders to adjust the values.
■ LPF field
This field enables you to set the LPF.
1 LPF knob
Specifies the cutoff frequency of the low pass
filter.
2 ON button
Switches the LPF on or off.
3 LPF type select button
Enables you to set the LPF attenuation per octave
to −6 dB/oct or −12 dB/oct.
■ HPF field
This field enables you to set the HPF.
1 HPF knob
Specifies the cutoff frequency of the high pass
filter.
2
ON button
Switches the HPF on or off.
3
HPF type select button
Enables you to set the HPF attenuation per octave
to −6 dB/oct, −12 dB/oct, −18 dB/oct, or
−24 dB/oct.
■ DCA/MUTE field
This field displays the DCA or mute group to which the channel is assigned.
1 DCA/mute group popup button
Indicates the DCA and mute group to which the
channel is assigned. Press this button to access
the DCA/MUTE ASSIGN (1CH) popup
window.
37
CONTENTS FUNCTION MAP
1
1
1
RIVAGE PM10 Operation Manual
FAQ
2
3
2
3