Inserting A Geq/Peq Into A Channel - Yamaha RIVAGE PM10 Operation Manual

GEQ/PEQ  Graphic EQ and parametric EQ
■ How DSP resources and scene memories are related
Plug-ins and GEQ/PEQ information that are saved as part of a scene memory also utilize the DSP
resources that are used by plug-ins and GEQ/PEQ. All plug-ins and GEQ/PEQ information used by
scene memory (x1,000), current memory (x1), and UNDO buffer (x3*) are placed together on the
DSP, and allocated DSP resources. (* UNDO buffer includes scene recall UNDO, scene update
UNDO, and scene delete UNDO.)
31BandGEQ
8BandPEQ
48
8BandPEQ
Flex15GEQ
Flex15GEQ
Flex15GEQ
Flex15GEQ
DSP resources
for GEQ/PEQ
DSP resources are allocated for plug-ins or GEQ/PEQ that exist in any of the 1,000 +4 memories.
For this reason, even after you remove all plug-ins from current memory, the DSP resources are still
allocated, and thus are still being consumed.
Scene 1
Scene 2
Scene 3
148

Inserting a GEQ/PEQ into a channel

This section explains how to insert a GEQ/PEQ into the selected channel for use.
There are three ways to control the GEQ/PEQ.
• Controlling a GEQ/PEQ via the Selected Channel section
• Controlling a GEQ/PEQ via the OVERVIEW screen
• Controlling a GEQ/PEQ via the SELECTED CHANNEL VIEW screen
■ Controlling a GEQ/PEQ via the Selected Channel section
1 2
1.
Select the channel that you want to operate.
2.
Press the INSERT [PLUG-INS] key to access the INSERT screen.
CONTENTS FUNCTION MAP
1
INSERT [PLUG-INS] key
Enables you to recall a parameter setting
screen for the inserted plug-in.
2 INSERT 1/2 [ON] keys
Switch INSERT1 and INSERT2 on or off
respectively.
RIVAGE PM10 Operation Manual
FAQ